Roland RK-300 - Manual (Page 188)

188
Settings
Local Off:
The keyboard and the internal sound generator are in an
unlinked state. No sound will be produced by the keyboard
when it is played.
fig.LocalOff.eps
When a Roland MT series instrument is connected, it is not
necessary to make the Local Off setting. The MT transmits a
Local Off message when the power is turned on. If you turn
on the power in the order of the VIMA
→ MT series, Local Off
will be set automatically.
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-3.eps
* There are three menu screens. Touch to switch
screens.
3.
Touch < USB >.
The following screen appears.
fig.d-USB.eps
4.
To change the setting, touch for the item
you want to specify.
If you touch < Reset >, all settings (parameters) shown in the
current screen will return to their factory-set values.
5.
When you’re finished making settings, press the
[EXIT] button.
6.
Turn the RK-300’s volume to the minimum setting.
Next, switch off the power, then turn it on again.
Setting Explanation
On
The Local Control is set to On.
The keyboard and internal sound
generator are connected.
Off
The Local Control is set to Off.
The keyboard and internal sound
generator are disconnected. Playing the
keyboard will not produce sound.
Local Off
No sound produced
Sound Generator
USB Settings
RK-300_e.book 188 ページ ２００８年９月１０日 水曜日 午後４時６分