Roland RK-300 - Manual (Page 50)

50
Performing
fig.d-Pdesigner1.eps
If you touch < Reset >, all settings (parameters) shown in the
current screen will return to their factory-set values.
You can change the volume of the damper pedal resonance.
On an acoustic piano, depressing the damper pedal makes
the notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal
on the RK-300 recreates this resonance (Damper Resonance)
when depressed.
This setting applies only for the front panel [PIANO] button
and for the piano tones Superior Grand and Natural Grand. It
is not available for other tones.
You can adjust the damper noise of the acoustic piano sound
(the sound of the damper releasing the strings when you
press the damper pedal).
This setting applies only for the front panel [PIANO] button
and for the piano tones Superior Grand and Natural Grand. It
is not available for other tones.
This setting is ignored when Damper Resonance is set to
“Off.”
“ Duplex Scale ” refers to a system that causes sympathetic
vibrations in the sections of the string toward the front and
toward the back.
It can produce sound that is richer and brighter by adding the
string’s higher harmonics.
Because no damper (sound-stopping mechanism) is applied
to the front or back sections of the string, the resonating
sounds linger even after the sound of the string stops when
you release the played key.
This setting applies only for the front panel [PIANO] button
and for the piano tones Superior Grand and Natural Grand. It
is not available for other tones.
Piano Designer 1
Adjusting Resonance when the
Damper Pedal is Depressed
(Damper Resonance)
Setting Explanation
Off, 1–10
The resonance volume decreases as the
value is lowered, while raising the value
increases the volume of the Damper
Resonance.
The Damper Resonance function is not
active when the value is set to “Off.”
Adjusting the Sound Heard at String
Release When the Damper Pedal is
Depressed (Damper Noise)
Setting Explanation
Off, 1–10
Larger values produce correspondingly
greater damper noise.
The Damper Noise function is not active
when the value is set to “Off.”
Adjusting the Sympathetic Vibrations
of an Acoustic Piano’s Duplex Scale
(Duplex Scale)
Setting Explanation
Off, 1–10
Higher settings will make the sympathetic
vibration louder.
The Duplex Scale function is not active
when the value is set to “Off.”
RK-300_e.book 50 ページ ２００８年９月１０日 水曜日 午後４時６分