Roland RK-300 - Manual (Page 182)

182
Settings
1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-2.eps
* There are three menu screens. Touch to switch
screens.
3.
Touch < Vocal >.
The following screen appears.
fig.d-Vocal.eps
4.
To change the setting, touch for the item
you want to specify.
If you touch < Reset >, all settings (parameters) shown in the
current screen will return to their factory-set values.
5.
When you’re finished making settings, press the
[EXIT] button.
Refer to “Applying an Effect to Your Voice (Vocal Effect)” (p.
104).
Refer to “Applying an Effect to Your Voice (Vocal Effect)” (p.
104).
This setting lets you add a backing chorus to the harmony
when you’ve selected “Duet,” “Trio,” or “Quartet.”
Here’s how to adjust the depth of the microphone echo
when Mic Echo is on.
Vocal Settings Switching the Type of Vocal Effect
(Effect)
Adjusting the Volume of the Harmony
(Harmony Level)
Adding a Backing Chorus to the
Harmony (Backing Choir)
Setting Explanation
Off A backing chorus will not be added.
Gregorian, Gospel, Classical Choir, Boys choir
Adjusting the Volume of the Backing
Choir (Backing Choir Level)
Setting
1–10
Selecting the Type of Mic Echo
(Echo Type)
Setting Explanation
1 A beautiful reverberation will be added.
2 A karaoke-type echo will be added.
Adjusting the Mic Echo (Echo)
Setting Explanation
1–10
Higher values produce a greater amount of
echo.
RK-300_e.book 182 ページ ２００８年９月１０日 水曜日 午後４時６分