Nortel Networks 1000E - Manual (Page 436)

Page 436 of 466 Installing and configuring Nortel IP Phones
NN43041-310 Standard 01.11 October 2008
Verifying Nortel IP Phone functionality
You can now use the IP Phones. To test the telephones, make Nortel IP
Phone-to-Nortel IP Phone calls.
Displaying registered IP Phones
Follow Procedure 105 to display the IP Phones registered on a Signaling
Server or Voice Gateway Media Card.
Procedure 105
Displaying registered IP Phones in Element Manager
1 Log in to Element Manager.
2 Select System > IP Network > Maintenance and Reports from the
navigator.
3 Click the desired node to expand it.
4 Click GEN CMD for the desired Signaling Server or Media Card.
a. Select Iset from the Group Drop Down List box.
b. If prompted, select the range of sets to display.
c. Click RUN.
The status of all IP Phones registered on this Signaling Server or Media Card
is displayed.
End of Procedure
Upgrading firmware
Refer to the IP Line: Description, Installation, and Operation
(NN43100-500), to check for the latest Nortel IP Phone firmware version and
how to upgrade to the latest Nortel IP Phone firmware.