Connecting an attendant console, Procedure 92 connecting an attendant console, Procedure 92: "connecting an attendant console" on – Nortel Networks 1000E User Manual
Page 387: Figure 171 on
Installing Line cards and cross-connecting telephones
Page 387 of 466
Communication Server 1000E
Installation and Commissioning
Figure 171
NTAK92BA Off-Premise Protection Module connections
End of Procedure
Connecting an attendant console
Procedure 92
Connecting an attendant console
1
Locate the attendant console terminations at the cross-connect terminal.
2
Locate the Line card terminations at the cross-connect terminal.
3
With cross-connect wire, connect the Line card and other connections to
the console, as shown in Figure 172 on
.
To off-premise
telephones
To analogue
line card in
Option 11
cabinet
NTAK92AA
Off-Premise
Protection
Module
Connector J1
Connector J2
Ground lug
BL - 1W
BL - 2W
O - 1W
O - 2W
G - 1W
G - 2W
BR - 1W
BR - 2W
BL - 1W
BL - 2W
O - 1W
O - 2W
G - 1W
G - 2W
BR - 1W
BR - 2W
J2
J1
NTAK9204
Cable
NTAK9204
Cable
Cross-connect
terminal block
T1
R1
T2
R2
T3
R3
T4
R4
T1
R1
T2
R2
T3
R3
T4
R4
553-8351.EPS