Nortel Networks 1000E User Manual
Page 416
Page 416 of 466
Installing and configuring Nortel IP Phones
NN43041-310
Standard 01.11
October 2008
9
Enter the administrator Nortel IP Phone Installer Password in the Node
Password box (see Figure 174).
Figure 174
Node Password
Note: The entered password appears as asterisks. The valid characters
are 0-9 * #. The password can be null or 6 to 14 digits in length.
10 Select NodePwd from the Group drop-down list.
11 Select nodePwdShow from the Command drop-down list.
12 Click RUN.
The updated administrator Nortel IP Phone Installer Password is
displayed in the text area at the bottom of the web page.
13 Enter the temporary Nortel IP Phone Installer Password (see
a.
Enter the password in the Node Password text box.
b.
Select NodePwd from the Group drop-down list.
c.
Select nodeTempPwdSet from the Command drop-down list.
The area then displays the Uses and Timeout text boxes.
d.
Enter a value for the number of uses or a value for timeout (in hours)
or both.
14 Click SET.
WARNING
If the administrator password is null (zero length), then
the Node ID, TN, and Password screens are not
displayed on the IP Phones during their registration
process. This provides security as it prevents any entry
of passwords or TNs on the IP Phones. However, it is
impossible to install new IP Phones (unless a temporary
password is set).