Nortel Networks 1000E - Manual (Page 132)

Page 132 of 466 Installing software on the CS 1000E
NN43041-310 Standard 01.11 October 2008
Reconfigure I/O ports and call registers
Procedure 19
Reconfiguring I/O ports and call registers
1 Evaluate the number of call registers and 500 telephone buffers that are
configured for the system (suggested minimum values are 4500 and 1000
respectively). If changes are required, reconfigure the values in LD 17:
2 Print the Configuration Record to confirm the changes made in Step 1:
End of Procedure
Procedure 20
Switching call processing to the CP PM Call Server
1 Plug the CP PM Call Server port labeled ELAN into the ELAN subnet.
2 Initialize (using the init button) the CP PM card.
3 Wait for “DONE” and then “INI” messages to display before you continue.
End of Procedure
LD 17 Load program
500B 1000 Use 1000 as a minimum value
NCR 20000 Use 20000 as a minimum value
**** Exit program
LD 22 Load program
REQ PRT Set the print option
TYPE CFN Print the configuration
**** Exit program