Nortel Networks 1000E User Manual
Page 101
![background image](/manuals/194031/101/background.png)
Page 101 of 466
Communication Server 1000E
Installation and Commissioning
116
Installing and connecting CS 1000E
hardware
Contents
This section contains information on the following topics:
Connecting CP PM Call Server 0 to CP PM Call Server 1. . . . . . . . . .
Installing the cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a Media Card to the ELAN subnet. . . . . . . . . . . . . . . . . . .
Connecting a Media Card to the TLAN subnet. . . . . . . . . . . . . . . . . . .
Connecting a Media Gateway to a Media Gateway Expansion . . . . . .
Introduction
Several system connections are required to make the CS 1000E operational.
The CS 1000E must be connected to the MG 1000E through the ELAN
subnet. The Media Gateways are directly connected to the Media Gateway
Expander. The system’s components, such as the ISP1100 Signaling Server
and the Media Cards installed in the Media Gateway, require both ELAN
subnet and TLAN subnet connections.
This chapter contains the following procedures:
•