Configuring a card, Adding a card to an ip telephony node – Nortel Networks 1000E User Manual
Page 319
Installing and configuring a Voice Gateway Media Card
Page 319 of 466
Communication Server 1000E
Installation and Commissioning
•
Procedure 74: "Displaying the status of Voice Gateway Media Card
units" on
•
Procedure 75: "Displaying the status of one unit on a Voice Gateway
Media Card" on
•
Procedure 76: "Disabling a Voice Gateway Media Card using Element
Manager" on
•
Procedure 77: "Disabling a Voice Gateway Media Card unit using
Element Manager" on
•
Procedure 78: "Enabling a Voice Gateway Media Card using Element
Manager" on
•
Procedure 79: "Enabling a Voice Gateway Media Card unit using
Element Manager" on
Configuring a card
A Voice Gateway Media Card requires configuration of:
•
the IP telephony properties defined with Element Manager (the Voice
Gateway Media Cards are assigned to an IP telephony node). See
“Configuring an IP telephony node” on
.
•
the voice gateway channels defined on the CS 1000E. See “Configuring
voice gateway channels using Element Manager” on
.
Adding a card to an IP telephony node
The Voice Gateway Media Card is added to an IP telephony node using
Element Manager only. See Element Manager: System Administration
(NN43001-632) for details.
Procedure 67
Adding a Voice Gateway Media Card to an IP telephony node
1
Log in to Element Manager.
2
Select IP Network > Nodes: Servers, Media Cards from the navigator.
The Node Configuration web page opens, as shown in Figure 127.