Nortel Networks 1000E - Manual (Page 197)

Installing a Signaling Server Page 197 of 466
Communication Server 1000E Installation and Commissioning
Figure 67
Install Tool Main Menu
4 At the Main Menu (Figure 67), enter a to install Signaling Server software.
Option a performs options b, c, d, and e.
The following sample lines display on the screen:
Copying “/cd0/sse37012.p3/disk.sys” to “/u/disk.sys”.
Processing the install control file ...
“/cd0/sse37012.p3/install.dat” parsed.
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
M A I N M E N U
The Install Tool will install Signaling Server software and related
files. You will be prompted throughout the installation.
Please enter:
-> - To perform a complete installation/upgrade (Signaling
Server s/w, IP Phone f/w, Voice Gateway Media
- To install/upgrade Signaling Server software only.
- To copy IP Phone firmware only.
- To copy Voice Gateway Media Card loadware only.
- To perform basic Signaling Server configuration only.
- To go to the Tools Menu.
- Quit.
Enter Choice>
Card l/w, basic Signaling Server configuration).