Nortel Networks 1000E - Manual (Page 165)

Configuring the CS 1000E CP PM Call Server Page 165 of 466
Communication Server 1000E Installation and Commissioning
Configuring Tone Detectors
Tone Detectors, when required, are configured in a manner similar to that for
Digitone Receivers. The SSC card in the MG 1000E provides four units of
Multifrequency Senders and Receivers. These units are configured on card 15
of the MG 1000E. In addition Multifrequency Transmit Level codes (MFTL0
and MFTL1) must be configured in LD 97.
Logging in to Element Manager
To log in to Element Manager, follow the steps in Procedure 35 on page 166 .
Element Manager supports Microsoft
TM
Internet Explorer 6.0.2600 for
Windows operating systems.
Before following this procedure, see Signaling Server: Installation and
Commissioning (NN43001-312) for information about setting up a browser
for optimal performance of Element Manager.
LD 97 - Configure Tone Detectors
Prompt Response Comment
REQ CHG Change existing data
TYPE SYSP System Parameters for Peripheral equipment)
...
MFLT0 (0)-15 Multifrequency transmit level code for Identifier 0 for
MG 1000E
MFLT1 (0)-15 Multifrequency transmit level code for Identifier 1 for
MG 1000E