Nortel Networks 1000E - Manual (Page 207)

Installing a Signaling Server Page 207 of 466
Communication Server 1000E Installation and Commissioning
Figure 80
Network Routing Service (NRS) — stand-alone Signaling Server
12 Select the Network Routing Service (NRS) to be provided by this
Signaling Server. See Figure 79 on page 206 for a co-resident Signaling
Server or Figure 80 on page 207 for a stand-alone Signaling Server.
• Enter d if this Signaling Server is configured as a Coresident Leader
and is not providing an NRS. Go to step 13.
• Press or enter a if this Signaling Server is to provide an H.323
Gatekeeper and a SIP Redirect/Proxy Server.
• Enter b if this Signaling Server is to provide only an H.323
Gatekeeper.
• Enter c if this Signaling Server is to provide only a SIP Redirect/Proxy
Server.Refer to Network Routing Service Installation and
Commissioning (NN43001-564) for more information on the NRS.
Depending on the application configuration selected, either the NRS type:
Coresident Signaling Server screen or the NRS type: Standalone Signaling
Server screen appears.
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the Network Routing Service (NRS) configuration for this
Signaling Server.
Please enter:
-> - H.323 Gatekeeper and SIP Redirect/Proxy Server.
- H.323 Gatekeeper only.
- SIP Redirect/Proxy Server only.
Enter Choice>