Nortel Networks 1000E - Manual (Page 113)

Installing and connecting CS 1000E hardware Page 113 of 466
Communication Server 1000E Installation and Commissioning
• TLAN (telephony) network interface
• one RS-232 (local console) port
Figure 28
Shielded 50-pin to Serial/ELAN/TLAN adapter
Procedure 14
Inserting a Shielded 50-pin to Serial/ELAN/TLAN adapter
1 Open the Media Card package NTDU41CA.
2 Remove the Shielded 50-pin to Serial/ELAN/TLAN adapter.
3 Save the other items from the package for use in “Installing a
CompactFlash” on
page 328 .
4 Insert the adapter, shown in Figure 28, into the connector Card 1, Card 2,
Card 3, or Card 4 that corresponds to the location of the Media Card.
For example, in Figure 29 on page 114 , the Media Card is installed in card
slot 1. Therefore, the adaptor is installed in connector Card 1.
End of Procedure
Identification Label
TLAN RJ-45
LAN socket
ELAN RJ-45
LAN socket
RS-232 Connector
Voice Gateway Media Card
maintenance port
50-pin connector