Nortel Networks 1000E - Manual (Page 433)

Installing and configuring Nortel IP Phones Page 433 of 466
Communication Server 1000E Installation and Commissioning
Procedure 102
Configuring the IP Softphone 2050
1 Access LD 11. Enter the command:
LD 11
2 Enter appropriate responses shown in Table 57.
End of Procedure
Installing and configuring on the PC
Installing the USB Headset Kit
Installing the USB Headset Kit application after the IP Softphone 2050
software application enables the IP Softphone 2050 application to show it as
an audio device option during the installation. If the USB Headset Kit is
Table 57
LD 11 – Configure the IP Softphone 2050
Prompt Response Description
REQ: NEW
CHG Add new data
Change existing data
TYPE: I2050pc Type of data block
TN l s c u Terminal number
DES x...x ODAS telephone designator
CUST xx Customer number, as defined in LD 15
...
ZONE 0-255 Zone number
FDN x...x Flexible CFNA DN
...
CLS aaa Class of service
HFA - Digital Telephone Handsfree Allowed is default for IP
Softphone 2050 to enable the USB interface