Nortel Networks 1000E - Manual (Page 410)

Page 410 of 466 Installing and configuring Nortel IP Phones
NN43041-310 Standard 01.11 October 2008
CLS ADD Class of Service
ADD - Automatic Digit Display, (default for Nortel IP
Phone)
For a complete list of responses, refer to Software Input/
Output: Administration (NN43001-611).
KEY xx aaa yyyy (cccc or D) zz..z
Telephone function key assignments
The following key assignments determine calling options
and features available to a telephone. Note that KEY is
prompted until just a carriage return is entered.
xx = key number
aaa = key name or function
yyyy = additional information required for the key
zz..z = additional information required for the key aaa.
The cccc or D entry deals specifically with the Calling
Line identification feature. Where:
cccc = CLID table entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1.
D = the character “D”. When the character “D” is
entered, the system searches the DN keys from key 0
and up, to find a DN key with CLID table entry. The CLID
associated with the found DN key will then be used.
Note: The position of the (cccc or D) field varies depending on
the key name or function.
You may enter a CLID table entry if aaa = ACD, HOT d,
HOT L, MCN, MCR, PVN, PVR, SCN or SCR.
Type xx NUL to remove a key function or feature.
Some data ports require specific key assignments. Refer
to the Meridian Data Services NTPs for information
regarding these requirements.
Table 55
LD 11 – Configure a Nortel IP Phone (Part 2 of 4)
Prompt Response Description