Nortel Networks 1000E - Manual (Page 265)

Page 265 of 466
Communication Server 1000E Installation and Commissioning
278
Connecting an MRV LX8020S-102AC-R
Terminal Server
Contents
This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Configuring a Terminal Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
Telnet Terminal Server virtual management port . . . . . . . . . . . . . . . . . 271
Telnet to CS 1000E COM port from a PC . . . . . . . . . . . . . . . . . . . . . . 271
Configuring an rlogin port for various applications . . . . . . . . . . . . . . . 273
Accessing an MRV Console Port through the on-board modem . . . . . 276
CS 1000E COM port types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Introduction
Many third-party applications require serial port interfaces to provide a
connection to a PBX. As well, support staff traditionally use serial ports to
connect maintenance terminals and modems to a system for maintenance. As
the CS 1000E Call Server provides only two local serial ports for these
purposes, an IP-based Terminal Server is required to provide the necessary
standard serial ports for applications.
The CS 1000E system currently supports two Terminal Servers, the
MRV LX8020S-102AC-R (ROHS) and the IR-8020M-101 (non-ROHS).
This chapter contains information on connecting the LX8020S-102AC-R.