Configuring a terminal server – Nortel Networks 1000E User Manual
Page 253
Connecting an IR-8020M-101 Terminal Server
Page 253 of 466
Communication Server 1000E
Installation and Commissioning
This chapter contains the following procedures:
•
Procedure 52: "Connecting a Terminal Server to the system"
on
•
Procedure 53: "Configure IP address for the Terminal Server"
on
•
Procedure 54: "Run telnet from PC" on
•
Procedure 55: "Accessing a CS 1000E from a PC through telnet
Terminal Server" on
•
Procedure 56: "Configuring a transparent rlogin port" on
•
Procedure 58: "Accessing an MRV Console Port through the
on-board modem" on
Configuring a Terminal Server
Follow Procedure 52 to connect a Terminal Server with a CS 1000E system.
Table 16 lists the MRV cables required to install the IR-8020M-101 Terminal
Server in a CS 1000E system.
Table 16
Required MRV serial cables and connectors
Order Code
Description
NTDU6302
Connects MRV Terminal Server to any
standard DTE port or DCE port when a Null
modem is used
NTDU6303
Used for telnet, rlogin connections
P/N-151-3028
Male RJ-45 to Male RJ-45 with connectors,
10 feet
P/N-350-0308
Female RJ-45 to Female DB9