Nortel Networks 1000E - Manual (Page 338)

Page 338 of 466 Installing and configuring a Voice Gateway Media Card
NN43041-310 Standard 01.11 October 2008
Where xx.xxx.xxx.xxx is the ELAN IP address of the Voice Gateway
Media Card and the meaning of the status is:
• Disabled – The card is configured but out-of-service.
• Enabled – The card is configured and operational.
• Unequipped – The card is not configured in the Call Server.
End of Procedure
Procedure 73
Displaying the Voice Gateway status for all voice gateway channels
1 In Element Manager, select IP Network > Nodes: Servers, Media Cards
> Maintenance and Reports from the navigator.
The Node Maintenance and Reports web page opens, as shown in
Figure 143 on
page 337 .
2 Open the desired node by clicking on the + next to the Node ID.
This displays the Signaling Servers and Voice Gateway Media Cards
belonging to the node, as shown in Figure 144 on
page 337 .
3 Click GEN CMD for the desired Voice Gateway Media Card.
The General Commands web page opens, as shown in Figure 145.