Nortel Networks 1000E - Manual (Page 415)

Installing and configuring Nortel IP Phones Page 415 of 466
Communication Server 1000E Installation and Commissioning
3 Click the desired node to expand it.
4 Click GEN CMD for the chosen Signaling Server or Media Card.
The General Commands web page opens, as shown in Figure 173.
Figure 173
General Commands
5 Select NodePwd from the Group drop-down list.
6 Select nodePwdShow from the Command drop-down list.
7 Click RUN.
The current node password information displays in the text area at the
bottom of the web page.
8 Select nodePwdSet from the drop-down list.