Nortel Networks 1000E - Manual (Page 162)

Page 162 of 466 Configuring the CS 1000E CP PM Call Server
NN43041-310 Standard 01.11 October 2008
End of Procedure
LD 117 – Bandwidth management zone commands
Command Description
NEW ZONE xxx p1 p2 p3 p4 p5 Create a new zone, where:
xxx = zone number = (0) - 255.
p1 = Intrazone available bandwidth
= 0 - (10 000) - 100 000 (Kbps)
p2 = Intrazone preferred strategy
= (BQ for Best Quality) or BB for Best Bandwidth
p3 = Interzone available bandwidth
= 0 - (10 000) - 100 000 (Kbps)
p4 = Interzone preferred strategy
= BQ for Best Quality or BB for Best Bandwidth
p5 = Zone resource type
= (shared) or private
NEW ZONE xxx Create a new zone with default values for the parameters:
p1 = 10 000 (Kbps)
p2 = BQ
p3 = 10 000 (Kbps)
p4 = BQ
p5 = shared
CHG ZONE xxx p1 p2 p3 p4 p5 Change parameters of a zone. All parameters, including
those that are unchanged, must be re-entered.
OUT ZONE xxx Remove a zone.
DIS ZONE xxx Disable a zone. When a zone is disabled, no new calls
are established inside, from, or toward this zone.
ENL ZONE xxx Enable a zone.
PRT ZONE xxx Print zone and bandwidth information.