Nortel Networks 1000E - Manual (Page 141)

Installing software on the CS 1000E Page 141 of 466
Communication Server 1000E Installation and Commissioning
Procedure 26
Testing CP PM Call Server 1
From active CP PM Call Server 0, perform these tests on CP PM Call Server
1:
1 Perform a redundancy sanity test:
2 Check the LCD states.
a. Perform a visual check of the LCDs.
b. Test LCDs:
c. Check that the LCD display matches the software check.
3 Test the System Utility card:
4 Test system redundancy and media devices:
LD 135 Load program
STAT CPU Get status of CPU and memory
TEST CPU Test the CPU
LD 135 Load program
TEST LCDs Test LCDs
DSPL ALL
LD 135 Load program
STAT SUTL Get the status of the System Utility card
TEST SUTL Test the System Utility card
LD 137 Load program
TEST RDUN Test redundancy
DATA RDUN Test database integrity
STAT FMD Status of one or both Fixed Media Devices
(FMD)