Nortel Networks 1000E - Manual (Page 193)

Installing a Signaling Server Page 193 of 466
Communication Server 1000E Installation and Commissioning
Figure 63
Install Tool banner screen
3 Press to perform system checks. If the system has less than 1
Gbyte of RAM, the following error message appears:
WARNING: Your system has less than 1 GB RAM.
In order to run Rls 5.0 software you must
upgrade RAM to 1 GB and repeat install.
Otherwise serious service problems are likely
Please enter:
-> - Quit.
- Accept the possible risks and
continue install.
Press to quit. Upgrade to 1 Gbyte of RAM (see Signaling
Server: Installation and Commissioning (NN43001-312)) and restart
the Signaling Server Install Tool again.
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
#####
######### ########
########`` `#############
######## `` `#############
#######` ######```####
####### ######`` `### NORTEL NETWORKS
####### #####`` ####
####### #####` #### Communication Server 1000 Software
`#########` ####`
#######` ##### Copyright 2002 – 2006
`####### #####’
########## `###`
##``########## #
## `########################
`# `########################
###########################``
````````` ````####````
Please press when ready ...