Nortel Networks 1000E - Manual (Page 226)

Page 226 of 466 Installing a Signaling Server
NN43041-310 Standard 01.11 October 2008
Depending on whether the Signaling Server is configured as Primary,
Alternate or Stand-alone, the Primary NRS IP address screen (Figure
103), the Alternate NRS IP address screen (Figure 104), or both in
succession (for a Stand-alone Signaling Server) appear.
Figure 103
Primary NRS IP address
Figure 104
Alternate NRS IP address
11 Enter the Primary NRS IP address or the Alternate NRS IP address,
depending on the option entered in step 12 on page 207 or step 13 on
page 208 .
• If a was entered in step 13, you can enter the address of the Alternate
NRS if you know it, but it is not required. See Figure 86 on
page 211 .
• If b was entered in step 13, enter the address of the Primary NRS.
See Figure 85 on
page 211 .
• If c was entered in step 13:
— Enter the address of the Primary NRS. See Figure 85.
— Enter the address of the Alternate NRS. See Figure 86.
• If d was entered in step 12:
— Enter the address of the Primary NRS (optional).
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please enter the Primary NRS IP Address:
Primary NRS IP :
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please enter the Alternate NRS IP Address:
Alternate NRS IP :