Fortinet MR1 User Manual
Page 97
97
static - Displays only the configured multicast entries.
dynamic - Displays only entries learned through IGMP snooping.
Default Setting
None
Command Mode
Privileged Exec
Display Message
VLAN: This displays VLAN ID value.
MAC Addr: This displays multicast group MAC addresses.
Type: This displays the type of multicast group (Dynamic/Static).
Member Port: This displays the number of ports of this vlan and multicast group.
show ip igmp snooping
This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled.
Syntax
show ip igmp snooping <1-3965>
<1-3965> - VLAN ID (Range: 1 – 3965).
Default Setting
None
Command Mode
Privileged Exec
Display Message
Vlan ID This is the list of VLANS on which IGMP Snooping is enabled.
IGMP Snooping Admin Mode This indicates whether or not IGMP Snooping is active on the VLAN.
Fast Leave Mode This indicates whether or not IGMP Snooping Fast-leave is active on the VLAN.
Group Membership Interval Time The Group Membership Interval time is the amount of time in seconds
that a switch will wait for a report from a particular group on a particular interface, which is participating in
the VLAN, before deleting the interface from the entry.This value may be configured