Fortinet MR1 - Manual (Page 172)

172
Syntax
spanning-tree protocol-migration { | all}
no spanning-tree protocol-migration { | all}
- is the desired interface number.
all - All interfaces.
no - This command disables BPDU migration check on a given interface. The all option disables BPDU
migration check on all interfaces.
Default Setting
None
Command Mode
Global Config
5.4.2.3 spanning-tree configuration
This command sets the Configuration Identifier Name for use in identifying the configuration
that this switch is currently using. The is a string of at most 32 alphanumeric
characters.
Syntax
spanning-tree configuration name
no spanning-tree configuration name
- is a string of at most 32 alphanumeric characters.
no - This command resets the Configuration Identifier Name to its default.
Default Setting
The base MAC address displayed using hexadecimal notation as specified in IEEE 802 standard.
Command Mode
Global Config