Fortinet MR1 - Manual (Page 181)

181
5.4.2.11 spanning-tree edgeport
This command specifies that this port is an Edge Port within the common and internal
spanning tree. This will allow this port to transition to Forwarding State without delay.
Syntax
spanning-tree edgeport
no spanning-tree edgeport
no - This command specifies that this port is not an Edge Port within the common and internal spanning
tree.
Default Setting
None
Command Mode
Interface Config
5.5 System Log Management Commands
5.5.1 Show Commands
5.5.1.1 show logging
This command displays logging.
Syntax
show logging
Default Setting
None
Command Mode
Privileged Exec