4 spanning tree commands, 1 show commands, 1 show spanning-tree – Fortinet MR1 User Manual
Page 164
164
Syntax
bootpdhcprelay serverip
no bootpdhcprelay serverip
no - This command is used to reset to the default value.
Default Setting
IP 0.0.0.0
Command Mode
Global Config
5.4 Spanning Tree Commands
This section provides detailed explanation of the spanning tree commands. The commands
are divided into two functional groups:
z
Show commands display spanning tree settings, statistics, and other information.
z
Configuration Commands configure features and options of the switch. For every configuration
command there is a show command that displays the configuration setting.
5.4.1 Show Commands
5.4.1.1 show spanning-tree
This command displays spanning tree settings for the common and internal spanning tree.
The following details are displayed.
Syntax
show spanning-tree
Default Setting