Fortinet MR1 - Manual (Page 236)

236
Command Mode
Global Config
5.10.2.8 sntp clock timezone
This command sets the time zone for the switch’s internal clock.
Syntax
sntp clock timezone <0-12> <0-59> {before-utc | after-utc}
- Name of the time zone, usually an acronym. (Range: 1-15 characters)
<0-12> - Number of hours before/after UTC. (Range: 0-12 hours)
<0-59> - Number of minutes before/after UTC. (Range: 0-59 minutes)
before-utc - Sets the local time zone before (east) of UTC.
after-utc - Sets the local time zone after (west) of UTC.
Default Setting
Taipei 08:00 After UTC
Command Mode
Global Config
5.11 System Utilities
5.11.1 clear
5.11.1.1 clear arp
This command causes all ARP entries of type dynamic to be removed from the ARP cache.