Fortinet MR1 - Manual (Page 314)

314
Syntax
ip route [ [<1-255 >] ]
no ip route [ { | <1-255 > } ]
- A valid IP address .
- A valid subnet mask.
- IP address of the next hop router.
<1-255> - The precedence value of this route. The range is 1 to 255.
no - delete all next hops to a destination static route. If the optional parameter is
designated, the next hop is deleted and if the optional precedence value is designated, the precedence
value of the static route is reset to its default value 1.
Default Setting
None
Command Mode
Global Config
6.2.2.5 ip route default-next-hop
This command configures the default route.
Syntax
ip route default-next-hop [1-255]
- IP address of the next hop router.
<1-255> - Precedence value of this route.
Default Setting
None
Command Mode
Global Config
6.2.2.6 ip route precedence
This command sets the default precedence for static routes. Lower route preference values
are preferred when determining the best route. The "ip route" and "ip default-next-hop"
commands allow you to optionally set the precedence of an individual static route. The
default precedence is used when no precedence is specified in these commands. Changing