2 show ip filter – Fortinet MR1 User Manual

Page 126

126

Syntax

show ip interface

Default Setting

None

Command Mode

Privileged Exec

Display Message

IP Address: The IP address of the interface. The factory default value is 0.0.0.0
Subnet Mask: The IP subnet mask for this interface. The factory default value is 0.0.0.0
Default Gateway: The default gateway for this IP interface. The factory default value is 0.0.0.0
Burned In MAC Address: The burned in MAC address used for in-band connectivity.
Network Configuration Protocol Current: Indicates which network protocol is being used. The options
are bootp | dhcp | none.
DHCP Client Identifier TEXT: DCHP client identifier for this switch.
Management VLAN ID: Specifies the management VLAN ID.
Web Mode: Specifies whether the switch may be accessed from a Web browser. The factory default is
enabled.
Web Port: This field is used to set the HTTP Port Number. The value must be in the range of 1 to 65535.
Port 80 is the default value.
Java Mode: Specifies if the switch should allow access to the Java applet in the header frame. Enabled
means the applet can be viewed. The factory default is disabled.

5.3.1.2 show ip filter

This command displays management IP filter status and all designated management
stations.