Fortinet MR1 - Manual (Page 53)

53
5.1.7 show loginsession
This command displays current telnet and serial port connections to the switch.
Syntax
show loginsession
Default Setting
None
Command Mode
Privileged Exec
Display Message
ID: Login Session ID
User Name: The name the user will use to login using the serial port or Telnet. A new user may be added
to the switch by entering a name in a blank entry. The user name may be up to 8 characters, and is not case
sensitive. Two users are included as the factory default, admin, and guest.
Connection From: IP address of the telnet client machine or EIA-232 for the serial port connection.
Idle Time: Time this session has been idle.
Session Time: Total time this session has been connected.
Session Type: Shows the type of session: telnet, serial or SSH.
5.2 Device Configuration Commands
5.2.1 Interface
5.2.1.1 show interface status
This command displays the Port monitoring information for the system.
Syntax
show interface status { | all}