Fortinet MR1 - Manual (Page 182)

182
Display Message
Logging Client Local Port The port on the collector/relay to which syslog messages are sent
CLI Command Logging The mode for CLI command logging.
Console Logging The mode for console logging.
Console Logging Severity Filter The minimum severity to log to the console log. Messages with an equal
or lower numerical severity are logged.
Buffered Logging The mode for buffered logging.
Syslog Logging The mode for logging to configured syslog hosts. If set to disable logging stops to all
syslog hosts.
Log Messages Received The number of messages received by the log process. This includes messages
that are dropped or ignored
Log Messages Dropped The number of messages that could not be processed.
Log Messages Relayed The number of messages that are relayed.
Log Messages Ignored The number of messages that are ignored.
5.5.2 show logging buffered
This command displays the message log maintained by the switch. The message log
contains system trace information.
Syntax
show logging buffered
Default Setting
None
Command Mode
Privileged Exec
Display Message
Message: The message that has been logged.
Note: Message log information is not retained across a switch reset.
5.5.3 show logging traplog
This command displays the trap log maintained by the switch.
The trap log contains a maximum of 256 entries that wrap.