Fortinet MR1 - Manual (Page 331)

331
6.3.2.11 area nssa translator-stab-intv
This command configures the translator stability interval of the NSSA. The
is the period of time that an elected translator continues to perform its duties after it
determines that its translator status has been deposed by another router.
Syntax
area nssa translator-stab-intv <0-3600>
- Area ID.
<0-3600> - The range is 0 to 3600.
Default Setting
None
Command Mode
Router OSPF Config
6.3.2.12 area range
This command creates a specified area range for a specified NSSA.
Syntax
area range {summarylink | nssaexternallink} [advertise
| not-advertise]
no area range
- Area ID.
- IP Address.
- The subnetmask.
summarylink - The lsdb type. The value is summarylink or nssaexternallink
nssaexternallink - The lsdb type. The value is summarylink or nssaexternallink
advertise - Allow advertising the specified area range.
not-advertise - Disallow advertising the specified area range.
- This command deletes a specified area range.
Default Setting
None
Command Mode