Fortinet MR1 - Manual (Page 530)

530
Viewing Stub Area Summary Information
Non-Configurable Data
Area ID - The Area ID of the Stub area
Type of Service - The type of service associated with the stub metric. The switch supports Normal
only.
Metric Value - Set the metric value you want applied for the default route advertised into the area. Valid
values range from 1 to 16,777,215.
Metric Type - The type of metric for the stub area where valid types are:
ƒ OSPF Metric - Regular OSPF metric
ƒ Comparable Cost - External Type 1 metrics that are comparable to the OSPF metric
ƒ Non-comparable Cost - External Type 2 metrics that are assumed to be larger than the cost of the
OSPF metric
Import Summary LSAs - Whether the import of Summary LSAs is enabled or disabled.
Command Buttons
Refresh - Refresh the data on the screen to the current values from the switch.
Configuring Area Range
Selection Criteria
Area ID - Selects the area for which data is to be configured.
Configurable Data
IP address - Enter the IP Address for the address range for the selected area.
Subnet Mask - Enter the Subnet Mask for the address range for the selected area.