Fortinet MR1 - Manual (Page 324)

324
Command Mode
Privileged Exec, User Exec
Display Messages
Area ID The area id of the requested OSPF area.
IP Address An IP Address which represents this area range.
Subnet Mask A valid subnet mask for this area range.
Lsdb Type The type of link advertisement associated with this area range.
Advertisement The status of the advertisement. Advertisement has two possible settings: enabled or
disabled.
6.3.1.10 show ip ospf stub table
This command displays the OSPF stub table. The information will only be displayed if OSPF
is initialized on the switch.
Syntax
show ip ospf stub table
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Messages
Area ID Is a 32-bit identifier for the created stub area.
Type of Service Is the type of service associated with the stub metric. FASTPATH only supports Normal
TOS.
Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the
type of service among the interfaces to other areas. The OSPF cost for a route is a
function of the metric value.
Metric Type Is the type of metric advertised as the default route.
Import Summary LSA Controls the import of summary LSAs into stub areas.
6.3.1.11 show ip ospf virtual-link
This command displays the OSPF Virtual Interface information for a specific area and
neighbor.