Fortinet MR1 - Manual (Page 479)

479
Hour - Hour in 24-hour format. (Range: 0 - 23).
Minute - Minute. (Range: 0 - 59).
Second - Second. (Range: 0 - 59).
Command Buttons
Submit - Send the updated screen to the switch. Changes take effect on the switch but these changes
will not be retained across a power cycle unless a save is performed.
Configuring Time Zone Settings Page
Simple Network Time Protocol (SNTP) allows the switch to set its internal clock
based on periodic updates from a time server. Maintaining an accurate time on the
switch enables the system log to record meaningful dates and times for event
entries. You can also manually set the clock using the CLI. If the clock is not set, the
switch will only record the time from the factory default set at the last bootup.
Configurable Data
Time Zone Name - The name of time zone, usually an acronym. (Range: 1-15 characters).
Time Zone Hours - The number of hours before/after UTC. (Range: 0-12 hours).
Time Zone Minutes - The number of minutes before/after UTC. (Range: 0-59 minutes).
• before-utc - Sets the local time zone before (east) of UTC
• after-utc - Sets the local time zone after (west) of UTC
Command Buttons