Fortinet MR1 - Manual (Page 267)

267
5.12.3.4 conform-color
This command is used to enable color-aware traffic policing and define the conform-color
class maps used. Used in conjunction with the police command where the fields for the
conform level (for simple, single-rate, and two-rate policing) are specified. The
parameter is the name of an existing Diffserv class map, where different
ones must be used for the conform and exceed colors.
Syntax
conform-color
- Name of an existing Diffserv class map, where different ones must be used for
the conform colors.
Command Mode
Policy-Class-Map Config
5.12.3.5 mark cos
This command marks all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header. If the packet does not already contain
this header, one is inserted. The CoS value is an integer from 0 to 7.
Syntax
mark cos <0-7>
<0-7> - The range of COS value is 0 to 7.
Command Mode