Fortinet MR1 - Manual (Page 380)

380
7 IP Multicast Commands
7.1 Distance Vector Multicast Routing
Protocol (DVMRP) Commands
This section provides a detailed explanation of the DVMRP commands. The
commands are divided into the following different groups:
Show commands are used to display device settings, statistics and other information.
Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
7.1.1 Show Commands
7.1.1.1 show ip dvmrp
This command displays the system-wide information for DVMRP
Syntax
show ip dvmrp
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Admin Mode This field indicates whether DVMRP is enabled or disabled. This is a
configured
value.
Display Message
Admin Mode Enable or disable DVMRP function.
Version This field indicates the version of DVMRP being used.
Total Number of Routes This field indicates the number of routes in the DVMRP routing
table.
Reachable Routes This field indicates the number of entries in the routing table with
non-infinitemetrics. The following fields are displayed for each interface.
Slot/Port Valid slot and port number separated by a forward slash.
Interface Mode This field indicates the mode of this interface. Possible values are Enabled
and Disabled.
State This field indicates the current state of DVMRP on this interface. Possible values are
Operational or Non-Operational.