Fortinet MR1 - Manual (Page 388)

388
IInterface Valid slot and port number separated by a forward slash.
Interface IP This displays the IP address of the interface participating in the multicast group.
State This displays whether the interface has IGMP in Querier mode or Non-Querier mode.
Group Compatibility Mode The group compatibility mode (v1, v2 or v3) for the specified group on this
interface.
Source Filter Mode The source filter mode (Include/Exclude) for the specified group on this interface. This
is “-----” for IGMPv1 and IGMPv2 Membership Reports.
If detail is specified, the following fields are displayed:
Interface Valid slot and port number separated by a forward slash.
Group Compatibility Mode The group compatibility mode (v1, v2 or v3) for the specified group on this
interface.
Source Filter Mode The source filter mode (Include/Exclude) for the specified group on this interface. This
is “-----” for IGMPv1 and IGMPv2 Membership Reports.
Source Hosts This displays the list of unicast source IP Addresses in the group record of the IGMPv3
Membership Report with the specified multicast group IP Address. This is “-----” for IGMPv1 and IGMPv2
Membership Reports.
Expiry Time This displays the amount of time remaining to remove this entry before it is aged out. This is “-
----” for IGMPv1 and IGMPv2 Membership Reports.
7.2.1.5 show ip igmp interface stats
This command displays the IGMP statistical information for the given interface. The statistics
are only displayed when the interface is enabled for IGMP.
Syntax
show ip igmp interface stats
- Valid slot and port number separated by a forward slash.
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Display Message
Querier Status This field indicates the status of the IGMP router, whether it is running in Querier mode or
Non-Querier mode.
Querier IP Address This field displays the IP Address of the IGMP Querier on the IP subnet to
which this interface is attached.
Querier Up Time This field indicates the time since the interface Querier was last changed.
Querier Expiry Time This field displays the amount of time remaining before the Other Querier
Present Timer expires. If the local system is the querier, the value of this object is
zero.