Fortinet MR1 - Manual (Page 252)

252
<2000-2099> - Year (4-digit). (Range: 2000 - 2099).
Default Setting
None
Command Mode
Privileged Exec
5.11.11 reload
This command resets the switch without powering it off. Reset means that all network
connections are terminated and the boot code executes. The switch uses the stored
configuration to initialize the switch. You are prompted to confirm that the reset should
proceed. A successful reset is indicated by the LEDs on the switch.
Syntax
reload [slot]
Default Setting
None
Command Mode
Privileged Exec
5.11.12 configure
This command is used to activate global configuration mode
Syntax
configure
Default Setting
None
Command Mode
Privileged Exec