Fortinet MR1 User Manual
Page 83
83
This command adds a protocol-based VLAN group to the system. The <group-name> is a
character string of 1 to 16 characters. When it is created, the protocol group will be assigned
a unique number that will be used to identify the group in subsequent commands.
Syntax
switchport protocol group
no switchport protocol group
no - This command removes the protocol-based VLAN group that is identified by this
Default Setting
None
Command Mode
Global Config
This command adds all physical interfaces to the protocol-based VLAN identified by
<group-name>. A group may have more than one interface associated with it. Each interface
and protocol combination can only be associated with one group. If adding an interface to a
group causes any conflicts with protocols currently associated with the group, this command
will fail, and the interface(s) will not be added to the group.
Syntax
switchport protocol group all
no switchport protocol group all
all - All interfaces.
no - This command removes all interfaces from this protocol-based VLAN group that is identified by this