Fortinet MR1 - Manual (Page 161)

161
<1-160> - timeout interval in seconds.
no - This command sets the SSH connection session timeout value, in minutes, to the default. Changing
the timeout value for active sessions does not become effective until the session is reaccessed. Any
keystroke will also activate the new timeout duration.
Default Setting
5
Command Mode
Global Config
5.3.8 DHCP Client Commands
5.3.8.1 ip dhcp restart
This command is used to initiate a BOOTP or DCHP client request.
Syntax
ip dhcp restart
Default Setting
None
Command Mode
Global Config
5.3.8.2 ip dhcp client-identifier
This command is used to specify the DCHP client identifier for this switch. Use the no form to
restore to default value.
Syntax
ip dhcp client-identifier {text | hex }