Fortinet MR1 - Manual (Page 418)

418
ip pimsm staticrp
no ip pimsm staticrp
< rp-address > - the IP Address of the RP.
< group-address > - the group address supported by the RP.
< group-mask > - the group mask for the group address.
no - This command is used to delete RP IP address for the PIM-SM router. The parameter
is the IP address of the RP. The parameter is the group address supported by the RP.
The parameter is the group mask for the group address.
Default Setting
Disabled
Command Mode
Global Config
7.5.2.6 ip pimsm mode
This command sets administrative mode of PIM-SM multicast routing on a routing interface
to enable.
Syntax
ip pimsm mode
no ip pimsm mode
no - This command sets administrative mode of PIM-SM multicast routing on a routing interface to
disabled.
Default Setting
Disbaled
Command Mode
Interface Config