Fortinet MR1 User Manual
Page 100
100
all - All interfaces.
no - This command disables IGMP Snooping on all interfaces.
Default Setting
Disabled
Command Mode
Global Config
ip igmp snooping mcrtrexpiretime
This command sets the Multicast Router Present Expiration time on the system. This is the
amount of time in seconds that a switch will wait for a query to be received on an interface
before the interface is removed from the list of interfaces with multicast routers attached. The
range is 0 to 3600 seconds. A value of 0 indicates an infinite timeout, that is, no expiration.
Syntax
ip igmp snooping mcrtrexpiretime <0-3600>
no ip igmp snooping mcrtrexpiretime
<0-3600> - Expiration time (Range: 0 – 3600).
no - This command sets the Multicast Router Present Expiration time on the system to 0. A value of 0
indicates an infinite timeout, that is no expiration.
Default Setting
0
Command Mode
Global Config, Interface Config
ip igmp snooping max-response-time
This command sets the IGMP Maximum Response time on the system. The Maximum
Response time is the amount of time in seconds that a switch will wait after sending a query
on an interface because it did not receive a report for a particular group in that interface. This
value must be less than the IGMP Query Interval time value. The range is 1 to 3600 seconds.
Syntax
ip igmp snooping max-response-time
no ip igmp snooping max-response-time