Fortinet MR1 - Manual (Page 536)

536
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
Viewing Neighbor Table Information
This panel displays the OSPF neighbor table list. When a particular neighbor ID is specified,
detailed information about a neighbor is given. The information below will only be displayed if
OSPF is enabled.
Selection Criteria
Slot/Port - Selects the interface for which data is to be displayed or configured. Slot 0 is the base unit.
Non-Configurable Data
Router ID - A 32 bit integer in dotted decimal format representing the neighbor interface.
IP Address - The IP address of the neighboring router's interface to the attached network. It is used as
the destination IP address when protocol packets are sent as unicasts along this adjacency. Also used
in router-LSAs as the Link ID for the attached network if the neighboring router is selected to be