Fortinet MR1 - Manual (Page 276)

276
Mark IP Precedence Denotes the mark/re-mark value used as the IP Precedence for traffic
matching this class. This is not displayed if either mark DSCP or policing is in use for the
class under this policy.
Policing Style This field denotes the style of policing, if any, used simple.
Committed Rate (Kbps) This field displays the committed rate, used in simple policing,
single-rate policing, and two-rate policing.
Committed Burst Size (KB) This field displays the committed burst size, used in simple
policing.
Conform Action The current setting for the action taken on a packet considered to conform
to the policing parameters. This is not displayed if policing is not in use for the class under
this policy.
Conform COS Value This field shows the priority mark value if the conform action is
markcos.
Conform DSCP Value This field shows the DSCP mark value if the conform action is
markdscp.
Conform IP Precedence Value This field shows the IP Precedence mark value if the
conform action is markprec.
Non-Conform Action The current setting for the action taken on a packet considered to not
conform to the policing parameters. This is not displayed if policing not in use for the class
under this policy.
Non-Conform DSCP Value This field displays the DSCP mark value if this action is
markdscp.
Non-Conform IP Precedence Value This field displays the IP Precedence mark value if this
action is markprec.
Bandwidth This field displays the minimum amount of bandwidth reserved in either percent
or kilobits-per-second.
Policy Name The name of this policy. (Note that the order in which the policies are displayed
is not necessarily the same order in which they were created.)
Policy Type The policy type, namely whether it is an inbound or outbound policy definition.
Class Members List of all class names associated with this policy.
5.12.5.4 show diffserv service
This command displays policy service information for the specified interface and direction.