Fortinet MR1 - Manual (Page 335)

335
6.3.2.18 area virtual-link retransmit-interval
This command configures the retransmit interval for the OSPF virtual interface on the
interface identified by <areaid> and <neighborid>.
Syntax
area virtual-link retransmit-interval <0-3600>
no area virtual-link retransmit-interval
- Area ID.
- Router ID of the neighbor.
<0-3600> - The range of the retransmit interval is 0 to 3600.
- This command configures the default retransmit interval for the OSPF virtual interface on the
interface identified by and .
Default Setting
The default value of retransmit interval is 5 seconds.
Command Mode
Router OSPF Config
6.3.2.19 area virtual-link transmit-delay
This command configures the transmit delay for the OSPF virtual interface on the virtual
interface identified by and .
Syntax
area virtual-link transmit-delay <0-3600>
no area virtual-link transmit-delay
- Area ID.
- Router ID of the neighbor.
<0-3600> - The range of the transmit delay is 0 to 3600.
- This command configures the default transmit delay for the OSPF virtual interface on the virtual
interface identified by and .
Default Setting