Fortinet MR1 - Manual (Page 163)

163
Server IP Address - IP address of the BOOTP/DHCP server or the IP address of the next BOOTP/DHCP
Relay Agent.
Circuit Id Option Mode - This is the Relay agent option which can be either enabled or disabled. When
enabled Relay Agent options will be added to requests before they are forwarded to the server and
removed from replies before they are forwarded to clients.
Requests Received - The total number of BOOTP/DHCP requests received from all clients since the last
time the switch was reset.
Requests Relayed - The total number of BOOTP/DHCP requests forwarded to the server since the last
time the switch was reset.
Packets Discarded - The total number of BOOTP/DHCP packets discarded by this Relay Agent since the
last time the switch was reset.
5.3.9.2 Bootpdhcprelay maxhopcount
This command is used to set the maximum relay agent hops for BootP/DHCP Relay on the
system.
Syntax
bootpdhcprelay maxhopcount <1-16>
no bootpdhcprelay maxhopcount
<1-16> - maximum number of hops. (Range: 1-16).
no - This command is used to reset to the default value.
Default Setting
4
Command Mode
Global Config
5.3.9.3 Bootpdhcprelay serverip
This command is used to configure the server IP Address for BootP/DHCP Relay on the
system.