Fortinet MR1 - Manual (Page 561)

561
ƒ OSPF Type-1
ƒ OSPF Type-2
ƒ RIP
ƒ BGP4
Next Hop Slot/Port - The outgoing router interface to use when forwarding traffic to the destination.
Next Hop IP Address - The outgoing router IP address to use when forwarding traffic to the next router
(if any) in the path towards the destination. The next router will always be one of the adjacent neighbors
or the IP address of the local interface for a directly attached network.
Total Number of Routes - The total number of routes in the route table.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
Viewing Router Best Route Table
Non-Configurable Data
Network Address - The IP route prefix for the destination.
Subnet Mask - Also referred to as the subnet/network mask, this indicates the portion of the IP
interface address that identifies the attached network.
Protocol - This field tells which protocol created the specified route. The possibilities are one of the
following:
ƒ Local
ƒ Static
ƒ Default
ƒ MPLS
ƒ OSPF Intra
ƒ OSPF Inter
ƒ OSPF Type-1