Fortinet MR1 - Manual (Page 51)

51
5.1.4 show running-config
This command is used to display/capture the current setting of different protocol packages
supported on switch. This command displays/captures only commands with
settings/configurations with values that differ from the default value. The output is displayed
in script format, which can be used to configure another switch with the same configuration.
When a script name is provided, the output is redirected to a configuration script. The option
[all] will also enable the display/capture of all commands with settings/configurations that
include values that are same as the default values. If the optional is provided
with a file name extension of “.scr”, the output will be redirected to a script file.
Syntax
show running-config [all] []
[all] - enable the display/capture of all commands with settings/configurations that include values that
are same as the default values.
- redirect the output to the file .
Default Setting
None
Command Mode
Privileged Exec
5.1.5 show sysinfo
This command displays switch brief information and MIBs supported.
Syntax
show sysinfo
Default Setting
None
Command Mode